Grout Colorant

Grout Colorant Key Features:

For use on

Sanded, unsanded and epoxy grout joints. Effective for interior and exterior applications. Suitable for new or existing grout

Grout Colorant is an easy-to-use waterborne epoxy that recolours, seals and rejuvenates existing grout joints. Formulated to provide maximum stain protection. Change the appearance and colour of your faded, stained or patchy grout with 20 colours to choose from. Also simplifies ongoing grout cleaning.


General Surface Prep

Test a small area according to application instructions, with a minimum 1-hour cure time to determine desired results. The Grout must be dry prior to applying Grout Colorant – the following document explains in detail the definition of the term “dry” as it relates to Colorant application. READ MORE

Application Method

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Read entire label before using. SHAKE WELL before using. For new installations, Grout Colorant can be applied a minimum of 48 hours after grouting depending on jobsite conditions and ambient temperature. Grout joints must be clean, dry and free of existing sealers or coatings.

Cleaning of equipment

Clean tools with water and soap before material dries

Prepare existing grout joints:

If more than 1 bottle of a single color is to be used, mix the material together in a large container to ensure uniformity of color. Spread evenly using the Applicator Brush or toothbrush, working Grout Colorant into joint using a back-and-forth motion. Thin, even coats should be applied, limiting the amount of Grout Colorant that gets on the tile. If going from a dark to light grout color, more than 1 application may be necessary with a minimum 2-hours drying time between coats. After Grout Colorant has dried 1 or more hours (never more than 12 hours), lightly mist surface with water and let stand 5 minutes. Remove excess Grout Colorant from surface of tile using water and a white nylon scrub pad. For a more detailed application method: CLICK HERE

Drying Time:

  • Ready for surface traffic in 2 hours.
  • Keep area dry for at least 24 hours.
  • Avoid direct scrubbing on grout joints for 20 days to allow a full cure.

Grout ColorantGrout Colorant Charts

Grout Colorant Colour Chart DAVCO Colour Comparison Chart

How to Guide:

Grout Recolouring

Product Maintenance:

Maintenance of Grout Joints

VOC Content

Maximum VOCs: Less than 60 grams per litre

How To Videos

Product Warranty

Require Technical Assistance?

Please contact us at 1300 AQUA MIX or