by COG Support | Jun 27, 2022
Procedure: 1. Always test a small area first to ensure satisfactory results. 2. For new installations, Enrich‘N’Seal® or Stone Enhancer can be applied 48 hours after grouting. 3. Grout must be clean, dry and free of existing sealers and coatings. 4. Apply 1 to 2...
by COG Support | Jun 27, 2022
Procedure: 1. Always test a small area first to ensure satisfactory results. 2. Existing grout joints must be clean, dry and free of coatings or contaminants that may affect bond. If sealer is present and water droplets do not readily penetrate into grout, use Sealer...
by COG Support | Jun 27, 2022
Procedure: 1. Always test a small area first to ensure satisfactory results. 2. Sweep or vacuum surface. 3. Pre-wet a manageable area ( 25 sq. ft. (2 m2) on floors or 2 sq. ft. (.18 m2) on walls or countertops) with water. 4. Apply directly onto wet surface (1/2 to 1...
by COG Support | Jun 27, 2022
Procedure: 1. Always test a small area first to ensure satisfactory results. 2. Sweep or vacuum surface. 3. Apply Sealer & Coating Remover full strength to a small, manageable area of up to 25 sq. ft. (2.5 m2). Do not allow puddling in grout joints. 4. For light...
by COG Support | Jun 27, 2022
Procedure: Always test a small area first to ensure satisfactory results. Sweep or vacuum surface. Apply Grout Haze Clean-Up full strength onto a manageable area of up to 10 sq. ft. (1 m2) Allow to dwell 5 to 10 minutes. A longer dwell time may be needed. Agitate with...
