A complete stone & tile maintenance kit, ideal for all stone, tile & grout surfaces. All included cleaning products are concentrated, non acidic, non toxic & safe to use. The kit includes enough products to maintain an average tiled home for 12-18 months.
Included in Stone & Tile Maintenance Kit:
- 946ml of Concentrated Stone & Tile Cleaner
- 946ml of Heavy-Duty Tile & Grout Cleaner
- 946ml of NanoScrub®
- AquaScrub (including 3 soft white nylon scouring pads)
- Cleaning tips, and maintenance information
- 11L durable cleaning bucket with lid & handle
Suitable Tile Types
- All sealed and unsealed natural stone, tile & grout surfaces*
- Excellent for everyday cleaning, heavy-duty cleaning and problem solving
*NanoScrub® – Do not allow products to come in contact with any non-recommended surface, including (but not limited to) onyx and soft limestone.
*Heavy-Duty Tile & Grout Cleaner – Do not allow cleaner to come in contact with any non-recommended surface. May adversely affect grout joints that have been coated with grout colorant. Regular use of high-alkaline cleaners will reduce sealer life.
Routine Cleaning – Concentrated Stone & Tile Cleaner
Best used in your mopping liquid. 2-3 capfuls of Concentrated Stone & Tile Cleaner in a 4L bucket of warm water is the ideal concentration for a streak free finish on most tile & stone surfaces. This product can also be used as a spray & wipe cleaner, 1-2 capfuls in a 500ml spray bottle is ideal for maintaining countertops and vertical surfaces. When used regularly, prevents soap scum build up and hard water deposits. This product will leave the room smelling clean and fresh.
Heavy-Duty Cleaning – Heavy-Duty Tile & Grout Cleaner
Occasionally stone, tile & grout can build up with soil and requires a heavy-duty scrub clean. Dilute 1 part Heavy-Duty Tile & Grout Cleaner to 5 parts water, then apply solution to surface with mop or sponge. Allow to dwell 3 to 5 minutes before cleaning. Agitate with a AquaScrub, synthetic mop, scrub brush, or scrub machine. Do not allow solution to dry on surface. Mop up dirty solution. Rinse thoroughly with clean water. This product can also be used for a spray & wipe cleaner, 50-100ml capfuls in a 500ml spray bottle is ideal for removing grease, soap scum, mould & mildew.
Problem Solving – NanoScrub®
Occasionally stone, tile, or grout areas need special attention to remove deep-set stains, grout haze, waxes, mineral deposits and ground-in dirt. SHAKE WELL BEFORE USING. Sweep, vacuum, or dust surface to remove any loose debris. Pre-wet surface with a liberal amount of water. Apply NanoScrub® directly to the wet surface. Agitate with a AquaScrub, scrub brush or scrub machine. Mop or wet vacuum up residue. Rinse thoroughly with clean water. NanoScrub® can be used as a power booster with Aqua Mix® Concentrated Stone & Tile Cleaner & Heavy-Duty Tile & Grout Cleaner. This product can also be used as a spot cleaner for tough marks & stains.