Aqua Mix® have developed a comprehensive range of specialty problem solving products for the tile & stone industry. Our problem solving products resolve a range of stone, tile & grout problems. These products provide special attention to remove deep-set stains, efflorescence, rust stains, stripping old finishes, or removing grout haze residue.
Cement Grout Haze Remover is an organic acidic treatment designed to remove cementitious grout haze, mineral deposits, rust stains, mortar smears, and efflorescence. Effective for the removal of most hard water stains, lime deposits, and soap scum. Also removes cement grout and mortar residue from tile, concrete, and masonry. Etches concrete. No phosphates.
NanoScrub® Tile Cleaner is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes Nano-sized particles to penetrate into small surface pores where it can effectively work to remove surface stains and residues. An effective Tile Cleaner for all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground in dirt and most sealer residues. Ideal for cleaning porcelain tiles.
Sealer & Coating Remover is a non-flammable, multipurpose stripper formulated to stay wet longer which gives the product time to remove most sealers, epoxy grout haze, urethane coatings, synthetic finishes, adhesives and paints. Also dissolves deep-set oil stains and heavy grease build up.
Grout Haze Clean-Up is a safe and effective concentrated cleaner that is added to the grout clean-up water for removal of cementitious grout haze and latex additive film from tile during the grout clean-up process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.
Aqua Mix® Non-Cement Grout Haze Remover is a safe cleaner that effectively removes Component®, premixed, urethane, and light epoxy grout haze from the face of most common tile and natural stone products
Eff-Ex® Efflorescence Remover is a unique product that is highly effective at removing and inhibiting efflorescence. Eff-Ex® is a non acidic (pH 7.4), efflorescence remover and inhibiting cleaning product. Much safer than using harsh damaging acids.
Ex-Treme® is a non-flammable, heavy-viscosity acidic gel cleaner designed to remove years of accumulated discolouration from air pollution or carbon build-up, stains from smoke, soot, red soil and rust. It is a safer alternative to traditional harsh acids.
Grout Release is a temporary, water soluble, pre-grout coating. It provides protection against grout and mortar staining and eases grout cleanup. Ideal for porous textured material such as; Sandstone, concrete pavers & bricks.
Poultice Stain Remover is a dual purpose, non-acidic stain remover. It is an absorptive clay that is designed to remove deep-set oil and grease stains without scrubbing. It is also a fine abrasive cleaning powder that removes surface stains and grout haze. Very effective on all natural stone and tile surfaces.
PRODUCT HAS BEEN RENAMED AQUA MIX CEMENT GROUT HAZE REMOVER.
Phosphoric Acid Substitute is a acidic treatment designed to remove grout haze, mineral deposits, rust stains, mortar smears, and efflorescence. Effective for the removal of most hard water stains, lime deposits, and soap scum. Also removes cement grout and mortar residue from tile, concrete, and masonry. Etches concrete. No phosphates.
