Grout Haze Clean-Up

Grout Haze Clean-Up Key Features

Just pour in cleanup water
Removes grout haze and latex additive film
Non-acidic formula

For use on

Unpolished natural stone (such as granite, limestone, marble, slate, and travertine), polished granite and slate, ceramic, porcelain, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone and tile surfaces.

Description

Grout Haze Clean-Up is a safe and effective concentrated cleaner that is added to the grout clean-up water for removal of cementitious grout haze and latex additive film from tile during the grout clean-up process. It may also be used full-strength to remove light grout residue within the first 10 days after grouting.

Limitations

Do not allow product to come in contact with any non-recommended surface
Do not use on polished marble or any other acid-sensitive tile or stone
Do not use excessive amounts of water during cleanup process as grout pigment may be washed out

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. DURING GROUT CLEANUP – Read entire label before using. Performgrout cleanup per grout manufacturer’s instructions. Mix 3 to 5 oz (90 to 147 mL) of Grout Haze Clean-Up per gallon (3.8 L) of water. Wet a grout sponge or terry cloth towel with the cleaning solution, wring out excess liquid. Wipe diagonally across the tile. Repeat steps 4 and 5 every 10 to 15 ft (.9 M to 1.3 M) or as necessary. Remove residual cleaning solution using a clean grout sponge or terry cloth towel dampened with clean water only. AFTER GROUT CLEANUP WITHIN 10 DAYS OF GROUTING – Use full strength if grout haze was not completely removed during grout cleanup. Apply directly to surface and agitate with white nylon scrub pad or brush. Allow product to dwell for 5 to 10 minutes for stubborn areas or heavier grout residue. Rinse with clean water to remove residual cleaning solution.

Product Data Sheets

Technical Data Sheets

Safety Data Sheets

Problem Solving Guides

Cleaning of equipment

Clean tools with water before material dries.

How to Guide:

Removal of Cement Grout Haze Residue

VOC Content

No VOCs

Available in

473ml

How To Videos

Product Warranty

Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. CUSTOM’s sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with CUSTOM’s printed instructions. CUSTOM makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another. This warranty is not transferrable.

Require Technical Assistance?

Please contact us at 1300 AQUA MIX or info@aquamix.com.au