NanoScrub

NanoScrub® Tile Cleaner is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes Nano-sized particles to penetrate into small surface pores where it can effectively work to remove surface stains and residues. An effective Tile Cleaner for all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground ­in dirt and most sealer residues. Ideal for cleaning porcelain tiles.

NanoScrubKey Features:

  • Dissolves ground in dirt from textured surfaces
  • Removes factory applied waxes and floor finishes
  • NanoScrub® is non-acidic and non-flammable
  • Breakthrough NanoSTG™ technology

For use on:

As a cleaner for porcelain tiles, ceramic, polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine), grout, quarry, saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone, tile and grout surfaces.

Limitations:

Do not allow product to come in contact with any non-recommended surface, including (but not limited to) onyx and soft limestone.

Application of Product:

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product.
Read entire label before using. SHAKE WELL BEFORE USING. Sweep, vacuum, or dust surface to remove any loose debris. Pre-wet surface with a liberal amount of water. Apply NanoScrub® directly to the wet surface. Agitate with a white nylon pad, scrub brush or scrub machine. Mop or wet vacuum up residue. Rinse thoroughly with clean water. NanoScrub® can be used as a power booster with any Aqua Mix® cleaner or problem solver, mixed according to directions. Apply chosen product to surface, add NanoScrub® and agitate mixture. Continue to follow directions on the chosen product making sure a clean water rinse is the final step to remove any remaining residue.

Cleaning of equipment:

Clean tools with water before material dries.

Data Sheets:

Technical Data Sheet

Safety Data Sheet

Problem Solving Guide

How to Guides:

Removal of Wax on Porcelain Tiles

Removing Grout Haze on Polished Marble or Acid-Sensitive Surfaces

Removal of Sealer Residue from Tile or Stone Surfaces

Removal of Pencil Marks/Metallic Stains

VOC Content:

Maximum VOCs: 0.6%

pH:

9-10 (alkaline)

Available in:

946ml, 3.8L

How to Videos:

Product Warranty