Non-Cement Grout Haze Remover

Key Features:

  • Removes single component, urethane and light epoxy grout haze
  • Non-acidic formula

For Use On

Natural stone (such as granite, limestone, slate and travertine), ceramic, porcelain, quarry, Saltillo.

Aqua Mix® Non-Cement Grout Haze Remover is a safe cleaner that effectively removes Component®, premixed, urethane, and light epoxy grout haze from the face of most common tile and natural stone products

Limitations to the Product

  • Do not allow cleaner to come in contact with any non-recommended surface
  • Do not use excessive amounts of water during clean-up process as grout pigment may be washed out.
  • Avoid scrubbing directly on the grout joints.
  • For moderate-heavy epoxy grout haze or any epoxy grout haze cured for more than 7 days, use Aqua Mix® Sealer & Coating Remover

Application of Product

USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. DO NOT KNEEL IN THIS PRODUCT. AVOID ALL SKIN CONTACT. Read entire label before using. Put on rubber gloves and eye protection
  • Grout installations should be cured overnight at a minimum and be clean
  • Sweep, vacuum, or wipe surface
  • Apply solution to surface and allow to dwell for the time indicated below: Time Grout has Cured Grout Type 24 hrs 4-7 days 28+ days Single Component, Premixed and Urethane 5-10 sec 1 min 3-5 min Light Epoxy Haze 2-3 min 5 min n/a
  • After dwell time, agitate with a white nylon scrub brush or scrub pad.
  • Clean up dirty solution. Do not allow

Cleaning of equipment

Clean tools with water before material dries.

VOC Content

Maximum VOCs:  25 grams per litre

Available in

946ml, 3.8L

Product Warranty

Require Technical Assistance?

Please contact us at 1300 AQUA MIX or info@aquamix.com.au