Grout Sealer

Buy Online
Find a Distributor

Grout Sealer Key Features

  • Dual Protection – Penetrates & Coats
  • Water based, non VOC formula
  • Repels Food, Dirt & Grease
  • Maximum Stain Protection
  • Inhibits Mildew & Bacteria
  • Simplifies Maintenance
  • Allows moisture vapor transmission
  • Last up to 5 years

For use on

As a sealer for cement based sanded and un-sanded porous grout joints for ceramic, porcelain and glass tile installations. Effective for internal and external use.  

Aqua Mix® Grout Sealer is an easy to use premium, no sheen, natural look, water-based sealer that resists water, oil, and acid-based contaminants.

Limitations

  • Do not allow sealer to dry on tile surface because a residue will be visible. If this occurs, use Aqua Mix® NanoScrub® and scrub with a nylon pad
  • Do not allow sealer to come in contact with any non-recommended surface
  • Sealers will not prevent surface wear or etching from acids or caustic chemicals

Application Method

Surface should be dry, clean and free of waxes, sealers or finishes. New installations need to dry 48 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results. The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE USE CHEMICAL-RESISTANT GLOVES, such as nitrile, when handling product. Read entire label before using. Apply by spraying or using a softbristle paintbrush or sponge paint applicator. NOTE: Be sure to wipe surface completely dry within 5 minutes of each application using absorbent paper, cotton or microfiber towels. After 2 hours conduct a test to determine if surface is completely sealed by applying water droplets to the surface. If water is absorbed, apply an additional application. Wait 2 hours and repeat the test. May be reapplied as needed to grout joints that are clean. Low VOC Pro-Solv

Drying Time

  • Allow 30 minutes drying time between applications.
  • Ready for surface traffic in 2 hours.
  • Keep dry for 12 hours.
  • Achieves a full cure in 24 hours.

Product Data Sheets

Technical Data Sheets

Safety Data Sheets

Problem Solving Guides

Cleaning of equipment

Clean tools with mineral spirits after use.

Product Maintenance

General Maintenance Guide for Grout Joints

VOC Content

No VOCs

Available in

237ml, 710ml

Product Warranty

Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. CUSTOM’s sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with CUSTOM’s printed instructions. CUSTOM makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another. This warranty is not transferrable.

Require Technical Assistance?

Please contact us at 1300 AQUA MIX or info@aquamix.com.au

Contact Us