Sealer’s Choice® Gold PFAS-Free – No Forever Chemicals
Key Features
-
- Free of PFAS (Per- and polyfluoroalkyl substances also known as “Forever Chemicals”)
- Safe to use, water-based, Non-VOC formula
- Premium sealer for most natural stones, tiles, and porous grout
- Maintains the natural look of most stones
- May be used as a pre-grouting sealer
- Allows moisture vapour transmission
- Now with built-in Microban® – Cured Sealant is Mould & Mildew Resistant
- Does not alter the slip resistance of the sealed surface
- Designed to achieve optimal penetration into dense, low-porosity surfaces
- Last up to 10 years
For Use On
As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.
Aqua Mix® Sealer’s Choice® Gold PFAS-Free is a new water-based sealer that protects stone, tile, and grout from stains and keeps them looking natural for up to 10 years. It is safe for food prep areas, easy to use, and can be applied before grouting. It contains no forever chemicals, no VOCs and it’s water based formula is designed to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone, tile & grout surfaces. This premium sealer also includes built in Microban® – Cured Sealant is Mould & Mildew Resistant.
Additional information
| Size | 1 PT. (473 mL), 1 QT. (946 mL), 1 GAL. (3.785 L), 5 US GAL. (18.92 L) |
|---|
Limitations
- Do not allow sealer to come in contact with any non-recommended surface.
- Natural stone varies greatly in composition and porosity. ALWAYS test a small and less conspicuous area before use.
- Some lighter-colored and polished stones may have visible sealer residue left on the surface after sealing if proper application procedures are not followed.
- Sealer will not prevent surface wear or etching from acids or caustic chemicals.
- If product is allowed to dry on surface, a white film may form. If this occurs, scrub with Aqua Mix NanoScrub and a white nylon pad.
Surface Preparation
The surface should be dry, clean and free of waxes, sealers or finishes. New installations need to be dry 24 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results. The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE
Procedure
- WEAR IMPERVIOUS GLOVES, such as nitrile, and eye protection when handling product.
- Read entire label before using.
- Shake container well before use.
- ALWAYS test a small and less conspicuous area before use.
- Apply a liberal coat using a paint pad applicator, sponge, brush, or airless sprayer. Ensure the entire surface has been treated.
- If applying to a dense, polished, or honed surfaces, use a white nylon scrub pad to lightly work the sealer into the surface before it is absorbed.
- Allow the sealer to penetrate for up to 5 minutes or until the sealer begins to dry.
- Wipe the surface with a clean damp microfiber towel. Then buff with a dry microfiber towel until dry.
- Apply the second coat, after a minimum of 30 minutes, by repeating steps 1 through 4. •
- Do not allow light foot traffic until 30 minutes after the final dry buff.
- Keep dry for 24 hours after application.
- Sealer will achieve maximum stain protection after 24 hours.
Product Data Sheets
Cleaning Of Equipment
Clean tools with soap and water immediately after use.
Drying Time
- Allow 30 minutes of drying time between applications when conditions are 20° Celsius and 70% RH.
- If temperatures are lower or humidity higher than these times may be longer.
- If unsure about the specific job site temperatures and conditions please contact one of our technical advisors.
- Ready for surface traffic in a minimum of 2 hours.
- Keep dry for a minimum of 12 hours.
- Achieves a full cure in a minimum of 24 hours.
VOC Content
Available in
How To Videos
Require Technical Assistance?
Please contact us at 1300 AQUA MIX or info@aquamix.com.au