Sealer's Choice Gold

Sealer’s Choice® Gold – Rapid Cure is a premium grade, high performance penetrating / impregnating stone, tile & grout sealer. It is a low VOCwater-based sealer formulated to provide maximum stain protection, especially in food preparation and serving areas. Ideal for all interior and exterior natural stone, tile & grout surfaces. This premium sealer also includes built-in Microban® – Cured Sealant is Mould & Mildew Resistant, and this sealer lasts up to 15 years.

Sealer's Choice Gold

Sealer's Choice GoldKey Features:

Sealer's Choice Gold

Suitable for use:

As a natural look sealer for all natural stone surfaces (such as sandstone, slate, quartz, marble, limestone, granite, bluestone / basalt) unglazed tiles, polished & unpolished porcelain tiles, clay pavers, polished & unpolished concrete, terrazzo, brick, grout, masonry, encaustic tiles, terracotta and grout. Suitable for both interior and exterior use.

Limitations:

  • Do not allow sealer to come in contact with any non-recommended surface.
  • If the product is allowed to dry on the surface, a white film may form. If this occurs, scrub with Aqua Mix® NanoScrub® and a white nylon pad.
  • The sealer will not prevent surface wear or etching from acids or caustic chemicals.
Surface Preparation
The surface should be dry, clean and free of waxes, sealers or finishes. New installations need to be dry 24 hours before application. Protect surrounding surfaces. Test product in an inconspicuous area to ensure desirable results. The Stone, Tile or Grout must be dry prior to applying sealer – the following document explains in detail the definition of the term “dry” as it relates to sealer application. READ MORE
Pre-Grout Sealer / Grout Release:
Porous tile and stone can be stained by grout during installation. Sealing the tile before grouting will make grout removal much easier. Apply sealer according to directions after the tile has been bonded for a minimum of 24 hours, or apply to the front face of tile before installation. Wait a minimum of 2 hours before grouting.
Procedure
  1. Always test a small area first to ensure satisfactory results.
  2. Apply using a pump sprayer, paint pad applicator, lambswool applicator, sponge or brush.
  3. Allow it to penetrate for up to 5 minutes, if the surface is drying within 5 minutes, apply more sealer to keep surface wet for up to 5 minutes.
  4. Wipe surface completely dry using clean, dry cotton, paper or microfiber towels after each application. Ensure no sealer is allowed to dry on the surface.
  5. Porous surfaces may require additional applications.
  6. Conduct a test to see if the surface is completely sealed after 2 hours by applying drops of water on the surface. If it penetrates, an additional application is required.
Drying Time
  • Allow 30 minutes of drying time between applications when conditions are 20° Celsius and 70% RH.
  • If temperatures are lower or humidity higher than these times may be longer.
  • If unsure about the specific job site temperatures and conditions please contact one of our technical advisors.
  • Ready for surface traffic in a minimum of 2 hours.
  • Keep dry for a minimum of 12 hours.
  • Achieves a full cure in a minimum of 24 hours.
Clean-Up
Clean tools with mineral spirits after use

Product Data Sheets:

VOC Content:

Maximum VOCs: <70 grams per litre

Available in:

473ml, 946ml, 3.8L, 18.9L

Where to Buy Where to Buy

 

Product Maintenance:

How to Video:

Product Warranty
Custom® Building Products warrants to the original consumer purchaser that its product shall be free from defects in material and workmanship under normal and proper usage for a period of one year following the date of original purchase. CUSTOM’s sole liability under this warranty shall be limited to the replacement of the product. Some states, countries or territories do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty will not extend to any product which has been modified in any way or which has not been used in accordance with CUSTOM’s printed instructions. CUSTOM makes no other warranties either expressed or implied. This warranty gives you specific legal rights, and you may have other rights that vary from state to state or from one country/territory to another. This warranty is not transferrable.

Sealer’s Choice® Gold Ad:

Click here

Approx. Coverage m² per/L: