How Do Enhancing Sealers Enhance?

Understanding Enhancing Sealers

By Scott Worthington

In relatively recent times the market has seen the introduction of enhancing penetrating sealers. People had got used to invisible penetrating materials but also require sealers that highlighted the stone. Tumbled marble, bluestone (Basalt) and other honed or weathered materials looked better when wet. However, only coating sealers and usually oil or solvent carried versions created this look. These were of course unsatisfactory because they wore off quickly, had poor vapour transmission, and were slippery when used outside. Penetrating versions of enhancing sealers were developed to cater for this growing requirement.

enhancing sealerThese have all been reasonably successful in that they do not affect slip resistance, provide good stain resistance, and breathe well. However, they do not have a long life and quite often fade out in a matter of months. There are of course exceptions and Aqua Mix® Enrich’N’Seal™ is one such exception. It uses  the Aqua Mix® trade marked Polycure Technology. This is a 100% moisture curing reactive poly-siloxane.

I get asked more questions about the aptitude of enhancers than any other sealer. If they penetrate how do they make the stone look dark? In other words how do they enhance the stone? The answer to this question has little to do with the particular chemical, but instead with the physics of light. When a dry stone is exposed to light we see a colour. This is because the stone absorbs and reflects a specific part of the spectrum. Remember the full spectrum is white light. So colours appear because we see only a specific part of the spectrum. The wavelength that is reflected back to our eyes gives us the colour we see. Look at what appears to be a smooth surface through a microscope and what you will actually observe is a very course and rough topography. This scatters the light which reflects back to us a lighter tone of the specific colour. It is what happens when the stone is wet that provides the answer to how enhancers work.

enhancing sealerWhen the same rough particles are coated with a liquid (for example Aqua Mix® Enrich’N’Seal™) they no longer reflect the scattered light to the same degree because the coating absorbs some of the otherwise reflected light. Hence, with a reduced amount of reflected light reaching our eyes we see a darker colour. The darker appearance is actually much closer to the true colour of the stone when viewed in unreflected light. This phenomenon also explains of why polished stone looks darker than unpolished. The polish simply reduces the amount of scattered reflected light, not withstanding the fact that the polished surface reflects the reduced scattered light in parallel, due to the smooth surface and is why it appears polished.

Enhancers such as Aqua Mix® Enrich’N’Seal™ not only absorb light (actually scattering it more effectively than natural particles) but by doing so they help absorb it deeper in the stone. This means that the light is exposed to more of the stones particles that in turn scatter the light thus reducing the quantity of light that can be reflected and refracted within the stone, therefore less light is reflected back to the onlooker. Consequently one sees a darker stone. The bottom line is the more durable the coating and enhancing chemical the longer the light will be absorbed and the longer we will see the stone as enhanced.

Require Technical Assistance?

Please contact us at 1300 AQUA MIX or